Mircom FA-1000 SERIES Bedienerhandbuch PDF herunterladen (Seite 11)

RA-1000 Remote Annunciator Wiring and Instruction Manual

Specifications and Features

Enclosure Models

BB-1001: Backbox for one annunciator chassis with keylock door.

BB-1002: Backbox for up to two annunciator chassis with keylock door.

BB-1003: Backbox for up to three annunciator chassis with keylock door.

BB-1008: Backbox for up to eight annunciator chassis with keylock door.

BB-1012: Backbox for up to twelve annunciator chassis with keylock door.

Module Models

RAM-1032(TZ) Main Annunciator Chassis, 32 Display Points (TZ version has 32 extra

trouble displays)

• 20 to 39 VDC (filtered or full-wave-rectified)

• Sealed membrane-like buttons and LED indicators.

• Local Buzzer, Indicators (AC-On, Common Trouble, Remote Failure, Aux. Disconnect,

Acknowledge, General Alarm, Signal Silence, Test/Config Mode), and Controls (System Reset,

Lamp Test, Fire Drill, Aux. Disconnect, Buzzer Silence, Signal Silence, General Alarm,

Acknowledge).

• Buzzer silence activation silences the main fire alarm panel buzzer and all attached

annunciator buzzers.

• Annunciation of up to 32 points (with trouble annunciation on the TZ version).

• Expandable by using up to four RAX modules.

• Standby: 50 mA Max., All LEDs “On”: 150 mA Max.

• TZ version: Standby 50mA Max., All LEDs “On”: 300mA Max.

RAM-1016(TZ) Main Annunciator Chassis, 16 Display Points (TZ version has 16 extra

trouble displays)

• 20 to 39 VDC (filtered or full-wave-rectified)

• Sealed membrane-like buttons and LED indicators.

• Local Buzzer, Indicators (AC-On, Common Trouble, Remote Failure, Aux. Disconnect,

Acknowledge, General Alarm, Signal Silence, Test/Config Mode), and Controls (System Reset,

Lamp Test, Fire Drill, Aux. Disconnect, Buzzer Silence, Signal Silence, General Alarm,

Acknowledge).

• Buzzer silence activation silences the main fire alarm panel buzzer and all attached

annunciator buzzers.

• Annunciation of up to 16 points (with trouble annunciation on the TZ version).

• Non-expandable.

• Standby: 50 mA Max., All LEDs “On”: 75 mA Max.

• TZ version: Standby 50mA Max., All LED’s “On” 150 mA Max.

Notes:

1. Enclosure finish: painted semi-gloss off white.

2. Material: BB-1001, BB-1002, BB-1003 are 18 GA. (0.048") thick CRS except the

BB-1003 Door, which is 16 GA (0.060”). BB-1008, BB-1012 backboxes are 16 GA.

(0.060") thick CRS, Doors are 14 GA (0.075”).

3. See Installation Instructions on page 2 for enclosure dimensions.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Mircom FA-1000 SERIES Bedienerhandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Mircom FA-1000 SERIES